3 Connecting Up and Starting to Use the Device
24 SRM-3006 Narda
3.1 Unpacking the device
3.1.1 Packaging
The packaging is designed to be re-used as long as it has not been
damaged during previous shipping. Please keep the original packaging and
use it again whenever the device is shipped.
3.1.2 Package contents
For details of the package contents, please refer to Ordering Information
on page 213.
3.1.3 Checking the device for shipping damage
After unpacking, check the device and all accessories for any damage that
may have occurred during shipping. Damage may have occurred if the
packaging itself has been clearly damaged. Do not attempt to use a device
that has been damaged.
3.1.4 Recovery after shipping and storage
Condensation can form on a device that has been stored or shipped at a low
temperature when it is brought into a warmer environment. To prevent
damage, wait until all condensation on the surface of the device has
evaporated. The device is not ready for use until it has reached a
temperature that is within the guaranteed operating range of -10 to +50 °C.
To Next Page
Loading...
