NARDA SRM-3006 - Displaying GPS Information; Resetting All Device Settings

5 The Main Menu
Narda SRM-3006 59
Displaying connected cable information
Main Menu • Settings • Device Info • Cable Info
Note: Information about the connected cable is only displayed when you
use a Narda cable.
⇒ Press the Cable Info softkey.
ª The cable information is displayed as a list.
5.2.4 Displaying GPS information
Main Menu • Settings • GPS Info
⇒ Press the GPS Info softkey.
ª A list of the GPS information is displayed.
i
5.2.5 Resetting all device settings
Main Menu • Settings • Reset Settings
⇒ Press the Reset Settings softkey.
ª The device settings shown in the window are all reset to their factory
default settings.
Table 9: Description of Cable Info list
Information Description
Long Name Cable description
Serial Number Cable serial number
Calibration Date Date of last calibration
Table 10: Description of GPS Info list
Information Description
Satellites in Use Number of satellites received
GPS Quality Indicator • NO = no GPS reception
• GPS = standard GPS
• DGPS = differential GPS with better
accuracy than GPS
Latitude Latitude of actual position
Longitude Longitude of actual position
Altitude Altitude of actual position
UTC Time Universal Time Coordinate