NARDA SRM-3006 - Display overview

8 Spectrum Analysis Mode
Narda SRM-3006 107
8.2.1 Changing the frequency range
Spectrum • Set Freq
Spectrum • Fcent, Fspan, Fmin, Fmax
You can set the frequency range in two ways in Spectrum Analysis mode:
• By entering the lower and upper frequency limits: Fmin, Fmax
• By entering the center frequency and the bandwidth: Fcent, Fspan
Figure 22: Entering the frequency range
1
2
3
4
5
No. Function / Description
1 Indication of Fmin / Fmax or Fcent / Fspan in the lower status bar.
2 Fmin in the diagram
3 Fmax in the diagram
4 Fspan = Fmax - Fmin
5 Fcent = (Fmin + Fmax) / 2