4 Operation and Basic Settings
50 SRM-3006 Narda
4.4.4 Entering text
A simple text editor opens so that you can enter alphanumeric characters
(e.g. when saving setups):
Figure 13: Text editor for entering alphanumeric characters
To enter text:
1. Use the rotary control to select a character from the character field.
(You can select a line directly using the ▲ and ▼ softkeys.)
ª The selected character is marked by a circle.
2. Press the Select Character to enter the character.
3. Press the OK key when you have finished entering the characters you
want.
There are some further functions that you can use to enter text:
Softkey Function
Space Enters a space.
Backspace Deletes the last character entered.
Delete All Deletes all characters entered.
Case Switches between upper and lower case characters:
• Lower: lower case characters.
• Upper: upper case characters.
To Next Page
Loading...
