5 The Main Menu
Narda SRM-3006 63
Displaying the services in a service table
Main Menu • Settings • Service Tables • View
⇒ Press the View softkey.
ª The services included in the table are listed.
Creating a new service table
Main Menu • Settings • Service Tables • Create
You can create a new service table using this menu.
Note: The facilities for creating service tables using the SRM-3006 itself
are limited. You cannot enter individual services manually or change
the service names. It is much more convenient to use the
SRM-3006 Tools PC software to create service tables. You can then
upload these service tables to the SRM-3006.
To create a new service table:
1. Press the Create softkey and enter the desired values.
2. Press the Save Table softkey when you have entered all the values.
3. Enter a name for the service table and save it.
Table 16: Description of Service Table ... list
Information Description
Service Service name
Fmin Lower frequency limit
Fmax Upper frequency limit
RBW Resolution bandwidth
To Next Page
Loading...
