NARDA SRM-3006 - The Marker function (Marker); The Zoom function (Zoom)

7 Safety Evaluation Mode
102 SRM-3006 Narda
Displaying the field strength distribution in percent
Safety Evaluation • Evaluation • Distribution
You can use the Distribution function to display the percentage contribution
of each service to the overall field strength. The total field strength value is
set to 100%.
To display the percentage distribution:
✓ The top menu level of the operating mode is displayed.
1. Press the Evaluation softkey.
2. Press the Distribution softkey.
The display depends on the table type selected. A (selectable) absolute
value is also shown continuously alongside the percentage value. This
absolute value can be selected using the Select Result Type softkey.
Display for table type: Standard:
Display for table type: Detailed:
Result type selected using the
Select Result Type softkey
Percentage value
Switches between the result type selected
using the Select Result Type softkey and
the percentage value.