12 Spatial Averaging
Narda SRM-3006 155
To save the result in the measurement data memory:
⇒ Press the SAVE key.
To delete the result:
⇒ Press the Clear softkey.
To exit from Spatial Averaging:
⇒ Press the ESC key.
Note: The instrument saves the actual (current) result of spatial averaging
in the measurement data memory when you press the SAVE key.
You can therefore use this function to save intermediate results.
When you press the Continue softkey, the instrument resumes
averaging and takes account of all the measured values obtained so
far. The instrument does not clear all the measurement values
recorded and start a new spatial averaging procedure until you press
the Clear softkey.
To Next Page
Loading...
