To access File mode:
► Press the FILE button.
→ The File menu is displayed. All File menu options are explained in the table below.
File Management Option Description
NEW Creates a new Project file. If you already have
a project open, you will be prompted to save
or discard it, after which a new Project will be
created.
SAVE AS Allows you to save the current Project with an
alternative name.
SAVE COPY Quickly allows you save a copy of the current
Project with a numerical iteration
automatically added to the file name.
RECENT This option is permanently selected and
displays the most recent projects that were
saved.
LOAD Allows you to load the selected file. Turn the
4-D encoder or Knob 8 to select a Project file
and press the 4-D encoder or Button 8 to load
it.
Basic Concepts
File Management on the MASCHINE Controller
MASCHINE - Manual - 107
To Next Page
Loading...
