The pages for the selected bank are displayed in the software and the controller.
► To access Page Navigation mode press NAVIGATE + SHIFT + Button 2.
→ When Page Navigation mode is enabled, your controller displays the Page Navigation
mode:
The left-hand display provides an overview of the selected Channels or Plug-ins for the select-
ed Sound.
► To access each Channel or Plug-in for the selected Sound, press Buttons 5 and 6.
→ After selecting a Plug-in, the available pages are displayed in the software, and on the
right-hand display of your controller.
The right-hand display provides an overview of the available pages for the selected Channel or
Plug-in.
► To access each page of the selected Channel or Plug-in, press pads 1–16.
→ After pressing a pad the selected page is displayed in the software, and on the controller
when you exit Navigation mode by pressing the NAVIGATE button.
When there are more than sixteen pages for a Channel or Plug-in it is necessary to use the
Page Bank.
► To access another page with the Page Bank press Buttons 7 and 8.
The pages for the selected bank are displayed in the software and the controller.
2.3.10 Using Two or More Hardware Controllers
If two or more MASCHINE controllers of different types (MASCHINE STUDIO, MA-
SCHINE MK3, MASCHINE MK2, MASCHINE MIKRO MK2, MASCHINE, MASCHINE MIKRO,
and MASCHINE JAM) are connected to your computer, only one controller can be used to con-
trol the MASCHINE software at a time.
If you have more than one instance of the MASCHINE software running on your comput-
er, you can control each instance with a different controller. See ↑2.5.3, Controlling Var-
ious Instances with Different Controllers for more information.
Basic Concepts
Common Operations
MASCHINE - Manual - 56
To Next Page
Loading...
