Native Instruments MASCHINE MK3 User Manual

▪ Press Button 5 (METRONOME) to enable the Metronome.
▪ Press Button 6 (LINK) to enable Ableton Link.
► To save your settings and return to MASCHINE mode, press SETTINGS.
For more information on using Link refer to: ↑2.8, Syncing MASCHINE using Ableton Link.
2.6.2 Preferences – Audio Page
The Audio page holds settings related to your audio interface.
For information on audio configuration and basic setup scenarios, please refer to the
MASCHINE MK3 Getting Started Guide available from the Native Instruments website.
The Interface section allows you to configure the audio interface for MASCHINE.
The Routings section allows you to configure the connections between the virtual inputs/out-
puts of MASCHINE and the physical inputs/outputs of your audio interface.
► To display the Audio page, click the Audio tab on the left of the Preferences panel.
Basic Concepts
Preferences
MASCHINE - Manual - 71

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs