Native Instruments MASCHINE MK3 User Manual

▪ When the Mixer displays the Sound strips of a Group, when you click another Group header
in the top row the Mixer will stay at the Sound level and directly display to the Sound strips
of this other Group.
▪ You can select more than one channel strip among the strips displayed. The focused strip
is always selected. The multiple selection follows the same rules as in Arrange view (see
section ↑4.1.3, Selecting Multiple Sounds or Groups).
Whichever channel strip is focused, the Plug-in Strip at the bottom of the Mix view
shows the Plug-ins loaded in that particular channel (see section ↑12.4, The Plug-in
Strip).
12.2.4 Managing Your Channels in the Mixer
The Mixer provides the same Sound and Group management commands as the Arrange view,
with similar procedures. Most of them are available via the channel’s context menu:
► To open the channel’s context menu, right-click ([Ctrl]-click on macOS) the background of
the channel header:
Opening the context menu of a channel automatically sets the focus on that channel.
Controlling Your Mix
The Mixer
MASCHINE - Manual - 600

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs