Native Instruments MASCHINE MK3 User Manual

2.3.5 List Overlay for Selectors
Many MASCHINE parameters are presented in the form of a selector providing a list of possible
values for the parameter (e.g., the Mode parameter of the Saturator Plug-in or the Dest. param-
eter in the Audio page of the Sound’s/Group’s Output Channel settings).
A selector.
From your controller, you can adjust such a parameter by turning the corresponding Knob un-
der the display of your controller.
When you touch the Knob of that parameter, a list appears above the parameter on the display
of your controller. This list shows you at a glance all possible values for the parameter you are
touching along with the value currently selected, making the value selection much more intui-
tive.
Touch the Knob under a selector (here the MODE parameter under the left display) to open a list with the values available
for selection.
Basic Concepts
Common Operations
MASCHINE - Manual - 41

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs