Native Instruments MASCHINE MK3 User Manual

1
2
3
4
5
6
The File Type selector.
(1) Project: (.mxprj)
(2) Groups: (.mxgrp)
(3) Sounds: (.mxsnd)
(4) Instrument Plug-in presets: (.mxinst)
(5) Effect Plug-in presets: (.mxfx)
(6) Samples: (.wav, .aiff)
► Click the desired icon in the File Type selector to display only the files of that type in the
Result list.
→ The selected icon is highlighted and the files are filtered accordingly.
Selecting a File Type on the Hardware
On your controller in Browser mode:
At the top left of the left display, press Button 1 or 2 to select the desired file type:
PROJECTS, GROUPS, SOUNDS, INSTRUMENTS, EFFECTS, or SAMPLES.
3.2.5 Choosing Between Factory and User Content
The Content selector shows two icons representing the factory content on the left, and the user
content on the right:
{Commented by Christian Schulz, 01.08.2016 16:43:50: In the following procedures the left
icon is called NI icon. Please find a more suitable one.}
Browser
Searching and Loading Files from the Library
MASCHINE - Manual - 127

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs