Native Instruments MASCHINE MK3 User Manual

Selecting a Section
► To select a Section in the current Section bank, press SCENE + the dim lit pad corre-
sponding to this Section.
Upon your selection, the following happens:
▪ The Pattern Editor displays the Pattern for the focused Group in this Section. If there is no
Pattern for the focused Group in the Section you have just selected, the Pattern Editor is
empty.
▪ The Loop Range is set to the selected Section — see section Selecting a Loop Range.
▪ If playback is off the playhead immediately jumps to the beginning of the selected Section.
If playback is on the playhead jumps according to the Perform Grid settings — see section
Jumping to Other Scenes.
15.3.5 Reorganizing Sections
Reordering Sections is essential to organize your Sections and arrange your song.
In the software you can reorganize sections both in the Arranger and in the Section Manager.
To move a Section:
1. Click and hold the Section name in the Arranger.
2. While holding the mouse button, drag your mouse horizontally in the Arranger to the de-
sired location.
As the mouse cursor moves, an insertion line appears at the potential places where you
can drop the Section.
Working with the Arranger
Using Arranger View
MASCHINE - Manual - 787

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs