14.2.2 Filter
Filter with selectable characteristics that can be modulated via LFO or envelope. There are
many applications for a filter: it can be used to emulate a synthesizer more realistically or to
filter out selected frequencies and create filter-sweeps.
If this effect is used in a Sound or a Group, it provides a Side-Chain Input page (in the Control
area and on your controller).
The Filter panel in the Plug-in Strip.
Main Page
The Filter in the Control area: Main page.
Parameter Description
TYPE Section
Mode Here you can select between four different filter modes: LP (low-
pass), BP (band-pass), HP (high-pass), and Notch. Depending on
the mode selected, the following parameters vary as indicated.
Effect Reference
Filtering Effects
MASCHINE - Manual - 680
To Next Page
Loading...
