Element Description
Size Adjusts the size of the room, measured as a percentage. Available
values range from 0.0 to 100.0 % (default: 50.0 %).
Amount Adjusts the amount of room effect applied to the drum sound,
measured as a percentage. Available values range from 0.0 to
100.0 % (default: 75.0 %).
Advanced Page
For this engine the Advanced page does not contain any parameters.
Modulation Page
As with all other engines and Drumsynths, the Modulation page contains one parameter: Veloc-
ity.
Element Description
SCALE Section
Velocity Adjusts the velocity response of the drum. Available values range
from -100.0 % to 100.0 % (default value). At zero (mid course),
the drum is played at full velocity, no matter how hard you hit the
keys (or pads). From that mid position, by turning the knob to the
right you increase the positive velocity response and make the drum
more and more sensitive to the velocities at which you hit the keys/
pads. From the mid position, turning the knob to the left as the
inverse effect: the harder you hit the key/pad, the softer the
resulting drum sound will be.
8.2.9 Kick – Push
The Push kick is an acoustic bass drum emulation that provides an aggressive and brazen
sound. It is essential for mixes where a dirty, tight and powerful kick is required. Its versatility
also allows for noisy and clicky kicks.
Using the Drumsynths
The Kicks
MASCHINE - Manual - 357
To Next Page
Loading...
Need help?
General
