Native Instruments MASCHINE MK3 User Manual

→ The selected Arrange Grid value is applied.
To Disable the Arrange Grid
► Press Button 8 or pad 16 to select OFF.
→ The Arrange Grid is disabled.
15.7 Quick Grid
The Quick Grid setting allows you to quickly and conveniently set the most common Pattern
lengths using your controller.
Quick Grid is only accessible from your controller.
When the Quick Grid is used, the following rules apply:
▪ The available Pattern lengths are as follows:1 bar, 2 bars, 4 bars, 8 bars, 12 bars, 16 bars,
etc. (+ 4 bars each time starting from 4 bars).
▪ The Quick Grid is exclusively applied to Pattern Length. For all other features related to the
Grid (for example, adjusting the playback position or the Loop Range), the Arrange Grid is
used.
▪ The Quick Grid setting is global and applies to all Patterns.
▪ When the Quick Grid is set to OFF, the Arrange Grid is used.
To enable the Quick Grid on your controller:
1. Press SHIFT + FOLLOW (Grid) to access the Grid page.
2. Press Button 3 to select ARRANGE.
3. Turn Knob 4 to enable the QUICK Grid.
Quick Grid is enabled and globally applied to all Patterns.
Working with the Arranger
Quick Grid
MASCHINE - Manual - 809

Native Instruments MASCHINE MK3 Specifications

General

Brand	Native Instruments
Model	MASCHINE MK3
Category	Recording Equipment
Language	English