→ The next time you select a new Section or group of Sections for looping, the new loop will
start from the beginning of the first Section (Retrigger enabled) or from the same position
as where it left the current Section (Retrigger disabled).
15.1.3.2 Jumping to Other Sections using the Controller
15.2 Using Ideas View
The Ideas view allows you to experiment with your musical ideas without being tied to a time-
line or any kind of arrangement. Here you can create Patterns for each Group and combine
them into a Scene.
In Ideas view, MASCHINE provides a perfect overview of all your Scenes, Patterns and Groups.
Here you can create a Scene by selecting a Pattern for each Group, duplicate your Scenes,
clear a Scene and more importantly trigger your Scenes to so you can hear how they sound
when played in a particular order.
Pressing a pad in Scene mode will trigger a Scene and in turn trigger all the assigned Patterns.
In addition to creating ideas, Scene mode is fantastic for improvisation during a performance.
15.2.1 Scene Overview
In the software, all Scenes can be managed from the Ideas view:
► To open Ideas view, click the Arranger view button at the left on the Arranger.
→ When the button is unlit Ideas view is active, when the button is lit Arranger view is ac-
tive.
Working with the Arranger
Arranger Basics
MASCHINE - Manual - 757
To Next Page
Loading...
