Modulation Page
As with all other engines and Drumsynths, the Modulation page contains one parameter: Veloc-
ity.
Element Description
SCALE Section
Velocity Adjusts the velocity response of the drum. Available values range
from -100.0 % to 100.0 % (default value). At zero (mid course),
the drum is played at full velocity, no matter how hard you hit the
keys (or pads). From that mid position, by turning the knob to the
right you increase the positive velocity response and make the drum
more and more sensitive to the velocities at which you hit the keys/
pads. From the mid position, turning the knob to the left as the
inverse effect: the harder you hit the key/pad, the softer the
resulting drum sound will be.
8.2.7 Kick – Bold
The Bold kick is an acoustic bass drum emulation that provides an aggressive character and a
punchy and dirty sound. It is capable of a range of sounds, from rock-like kicks to more snappy
and tight sub-kicks.
The parameters described below are presented as they appear in the Control area (Ar-
range view). The same parameters are available in the Plug-in panel within the Plug-in
Strip (Mix view). See ↑8.1.5, Pitch Range, Tuning, and MIDI Notes for more information
on this.
Main Page
Element Description
MAIN Section
Engine Selects the engine used in the Kick Plug-in. If you change this
setting, please refer to ↑8.2, The Kicks.
Using the Drumsynths
The Kicks
MASCHINE - Manual - 354
To Next Page
Loading...
Need help?
General
