Native Instruments MASCHINE MK3 User Manual

► Click and drag the Loop range left or right.
→ The whole Loop range is moved.
Activating or Deactivating a Loop in the Software
To activate a Loop using the software:
► Click the Loop button in the header to activate or deactivate the loop.
When the Loop is activated the Sections within the Loop range are repeated.
15.4 Playing with Sections
MASCHINE provides you with various tools to precisely control which Section has to be played,
and when.
Studio Track or Live Performance?
If you are composing a studio track that you plan to export as is, you can arrange your Sections
so that your whole track can be played in one go from the very first Section to the very last one.
Please refer to section ↑4.4.3, Exporting Audio for information on exporting audio.
Alternatively, if you are preparing a track for performing live, you will probably want to switch
back and forth between different Scenes in Ideas view during your performance.
Working with the Arranger
Playing with Sections
MASCHINE - Manual - 803

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs