8.3.3 Snare – Pow
The Pow snare is a shot of filtered noise, useful as an electro snare, an effect or a layer in a
combined snare sound.
The parameters described below are presented as they appear in the Control area (Ar-
range view). The same parameters are available in the Plug-in panel within the Plug-in
Strip (Mix view). See ↑12.4, The Plug-in Strip for more information on this.
Main Page
Element Description
MAIN Section
Engine Selects the engine used in the Snare Plug-in. If you change this
setting, please refer to ↑8.3, The Snares.
Tune Adjusts the pitch of the drum played by the middle C, measured as
a percentage. Available values range from 0.0 % to 100.0 %
(default: 50.0 %). For more details see ↑8.1.5, Pitch Range,
Tuning, and MIDI Notes.
Decay Adjusts the duration of the sound’s tail, measured as a percentage
(default: 50.0 %).
Bend Adjusts the pitch sweep of the sound, measured as a percentage.
Available values range from -100.0 % to 100.0 % (default: 0.0 %).
Focus Adjusts the attack of the sound as well as the speed and shape of
the pitch envelope, to produce a different quality of attack and
sharpness. Available values range from 0.0 to 100 % (default:
50.0 %).
Advanced Page
For this engine the Advanced page does not contain any parameters.
Using the Drumsynths
The Snares
MASCHINE - Manual - 365
To Next Page
Loading...
Need help?
General
