Native Instruments MASCHINE MK3 User Manual

→ The item is added to the Favorites, indicated by the Favorite icon next to its name:
Removing an Item from the Favorites
To remove an item from the Favorites use the following instructions:
1. Press the BROWSER button.
2. Turn the Control encoder to select the item you want to remove from the Favorites list.
3. Press SHIFT + Button 7 to remove the selected item from the Favorites list.
→ The item is removed from the Favorites list.
3.5 Editing the Files’ Tags and Properties
The Attribute Editor allows you to assign or edit tags and properties to your MASCHINE files to
make it easier to find them later when browsing the MASCHINE Library in the LIBRARY pane
(see section ↑3.2, Searching and Loading Files from the Library).
3.5.1 Attribute Editor Basics
The Attribute Editor is used in the following situations:
▪ At any time you can edit the tags and properties of user files already in the Library by se-
lecting them in the Result list of the LIBRARY pane and clicking the EDIT button at the
bottom right of the Browser. After you have finished editing click APPLY to apply your
Browser
Editing the Files’ Tags and Properties
MASCHINE - Manual - 153

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs