Native Instruments MASCHINE MK3 User Manual

The following picture shows you how this rhythm would sound with the following settings:
▪ Top: Amount at 0.0 % (no groove).
▪ Middle: Amount at 100.0 % and Invert off.
▪ Bottom: Amount at 100.0 % and Invert enabled.
This is how the same regular rhythm would be heard with various groove settings.
The picture above only illustrates how the groove function affects the sound — adjusting
the Groove properties will not effectively move events in the Patterns displayed in the
Pattern Editor!
5.4.4 Level, Tempo, Tune, and Groove Shortcuts on Your Controller
Your controller provides extra shortcuts for various important parameters. Most of these param-
eters are already available in the Channel properties of the Sounds, Groups, and Master. The
shortcuts detailed here give you an additional quick access to them — especially useful during
live performance.
You can quickly alter the output level, the tempo, and the swing (groove) of the Master as well
as the output level, the tune, and the swing of any Group or Sound via the MASTER section on
your controller.
In Step mode you can also use shortcuts to adjust the Velocity, Position or Tune of a selected
step.
Playing on the Controller
Playing Tools
MASCHINE - Manual - 248

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs