In Pitch mode, the scale on  the Smart Strip is centered, as  indicated  by a white LED in the
middle of the Smart Strip. Sliding your finger to the left will flatten the pitch. Sliding your fin-
ger to the right will sharpen the pitch. The amount of pitch bend applied to the Sound is indi-
cated by the LED dots above the Smart Strip. Once you lift your finger off the Smart Strip, the
pitch of the sound will return to standard tuning.
► To enable Pitch mode, press the PITCH button.
5.7.2 Modulation Mode
 
In Modulation mode,  sliding your  finger on  the Smart  Strip  modulates the  sound of  the notes
you play  on  the pads.  The  Smart  Strip always  controls  the  parameter  that  is  assigned to  the
standard MIDI CC #1. This MIDI Continuous Controller is reserved for the modulation wheel. If
you have used the  modulation wheel on a  synthesizer  or standard MIDI keyboard  before, you
are probably familiar with the effect.
In Modulation mode, the scale starts at the left side of the Smart Strip, as indicated by a white
LED. Sliding your finger to the right will apply an increasing amount of modulation, as indicat-
ed by the LED dots above the Smart Strip. When you lift your finger off the Smart Strip, the
modulation  value  will  remain  at  the  position  where  the  strip  was  last  touched;  the LED  dots
above remain lit to indicate this position.
► To enable Modulation mode, press the MOD button.
5.7.3 Perform Mode
 
In  Perform  mode,  the  Smart  Strip  controls  a  parameter  of  one  of  the  Perform  effects  (Per-
form FX) described in ↑14.7, Perform FX. For each of the Perform FX, the Smart Strip is map-
ped to the parameter that makes most sense to control in real time.
To control a Perform FX using the Smart Strip:
1. Press the PLUG-IN button.
2. Select the Group (A-H) you want to apply the effect to.
3. Open the Perform FX page on the controller by pressing SHIFT + PERFORM.
4. Select a Perform FX mode from the Mode menu by turning Knob 1, and letting go of the
knob when the effect you want to use is highlighted in the list.
Playing on the Controller
Using the Smart Strip
 
MASCHINE - Manual - 275