Native Instruments MASCHINE MK3 User Manual

Setting Description
Outputs Click Output to display a list of all the available MIDI outputs of
your system. You can activate/deactivate each output by clicking
the fields in the Status column, which displays the current status of
the corresponding port.
Adjusting MIDI Preferences Using the Controller
You can access the MIDI preferences directly from the controller. The options found here are a
replica of those found in the software.
To access the MIDI preferences from your controller:
1. Press SETTINGS to display the Settings page.
2. Press Button 3 (MIDI) to access the hardware settings.
▪ Turn Knob 1 (MODE) to adjust the MIDI Sync mode preference.
▪ Turn Knob 2 (CLOCK OFFSET) to adjust the Clock Offset.
▪ Turn Knob 5 (SELECT) to select a MIDI Input Device.
▪ Turn Knob 6 (STATUS) to enable or disable a MIDI Input Device.
▪ Turn Knob 7 (SELECT) to select a MIDI Output Device.
▪ Turn Knob 8 (STATUS) to enable or disable a MIDI Output Device.
► To save your settings and return to MASCHINE mode, press SETTINGS.
If you want MASCHINE to send other MIDI messages than MIDI Clock, in particular if
you want to control other MIDI-capable devices via the notes played in MASCHINE,
please refer to section ↑11.2.5, Sending MIDI from Sounds.
2.6.4 Preferences – Default Page
The Default page allows you to define the default settings that will be used for each new
Project.
► To display the Default page, click the Default tab on the left of the Preferences panel.
Basic Concepts
Preferences
MASCHINE - Manual - 78

Native Instruments MASCHINE MK3 Specifications

General

Brand	Native Instruments
Model	MASCHINE MK3
Category	Recording Equipment
Language	English