Native Instruments MASCHINE MK3 - Selecting Patterns and Pattern Banks

10.7.2 Selecting Patterns and Pattern Banks
{Commented by Christian Schulz, 04.10.2017 18:30:17: Something is wrong with the frag-
ments and taxononmy tagging.}
In the topmost row of the Pattern Editor, you can see on the left the name of the Pattern se-
lected:
The selected Pattern is named Basics.
Selecting a Pattern:
1. Open the Pattern Manager (see ↑10.7.1, The Pattern Manager and Pattern Mode).
2. If it is not already selected, select the Pattern bank containing the desired Pattern by
clicking its pad grid on the right.
The selected Pattern bank is surrounded by a white border, and the left part of the Pat-
tern Manager displays the Pattern slots in that bank.
3. Select the desired Pattern by clicking its name in the list on the left or by clicking its cell
in the selected pad grid on the right.
Working with Patterns
Managing Patterns
MASCHINE - Manual - 504