Native Instruments MASCHINE MK3 - Selecting or Loading a Product and Selecting a Bank from the Browser

1. Move the 4-D encoder left/right to select the field you want to select.
The selected field is indicated by thin brackets:
2. Turn the 4-D encoder to change the value in the selected field.
3. Move the 4-D encoder up/down to scroll the Results list.
4. Press the 4-D encoder to make a selection from the Results list.
3.2.2 Selecting or Loading a Product and Selecting a Bank from the Browser
The Product selector allows you to limit your search to a certain product category, a particular
product, or a specific bank of the product. You can also load a product along with its default
preset file directly from the Product selector (see below).
By default there is no particular selection in the Product selector; it reads All Instruments:
The closed Product selector header.
Browser
Searching and Loading Files from the Library
MASCHINE - Manual - 115