Native Instruments MASCHINE MK3 User Manual

2. Press SCENE (Section) then turn Knob 2 to select the Scene you want to add to the Sec-
tion.
→ The selected Scene is added to the Section.
By repeating this for each new Section, you can quickly add Scenes to the Arranger.
15.3.4 Selecting Sections and Section Banks
You can select the desired Section via the Section Manager or directly in the Arranger view.
Selecting a Section in the Arranger View
To select a Section in the Arranger view, do the following:
► Select the desired Section by clicking its name at the top of the Arranger view:
→
The Section name is now highlighted and underlined to indicate that this Section is se-
lected.
Selecting a Section and a Section Bank in the Section Manager
To select a Section in the Section Manager, do the following:
1. Open the Section Manager (see ↑15.3.1, Section Management Overview).
Working with the Arranger
Using Arranger View
MASCHINE - Manual - 783

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs