Native Instruments MASCHINE MK3 User Manual

2. If it is not already selected, select the Section bank containing the desired Section by
clicking its pad grid on the right.
The selected Section bank is surrounded by a white border, and the left part of the Sec-
tion Manager displays the Section slots in that bank.
3. Select the desired Section by clicking the slot with its name in the list on the left or by
clicking its cell in the selected pad grid on the right.
→ The Section slot and the corresponding cell on the right are now highlighted to indicate
that this Section is selected.
Once a Section Has Been Selected…
Once you have selected a Section using either of the methods described above, the following
happens:
Working with the Arranger
Using Arranger View
MASCHINE - Manual - 784

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs