16.4.3.2 Delete All Slices
The DELETE ALL option in SAMPLING EDIT mode is a quick and convenient way to delete all
Slices at once from a sample using your controller.
16.4.4 Manually Adjusting Your Slices
In addition to the Detect, Split, Grid, and Manual modes that create Slices automatically (see
section ↑16.4.2, Adjusting the Slicing Settings above), you can also adjust Slices manually us-
ing your mouse, the waveform display, and the various edit tools at your disposal.
You can directly adjust your Slices manually by selecting Manual in the MODE selector,
or start from MASCHINE’s proposed Slices as described in section ↑16.4.2, Adjusting
the Slicing Settings and fine-adjust these Slices manually — in that case the MODE se-
lector automatically switches to Manual.
Manually adjusting your Slices.
(1) Waveform display
Sampling and Sample Mapping
Slicing a Sample
MASCHINE - Manual - 846
To Next Page
Loading...
