5.2 Adjusting the Key, Choke, and Link Parameters for Multiple Sounds
In the software, if you select multiple Sounds with different Key, Choke and/or Link values, the
corresponding parameters in Pad view now display MULTI. On your controller in Pad Mode, the
corresponding parameters now display (MULTI).
Moreover, you can adjust these parameters for the selected Sounds as described below.
For general information on the Pad view of the software, the Pad Mode on your control-
ler, and the Key, Choke, and Link parameters, please refer to section 5.1 “Adjusting
Your Pads” in the MASCHINE 2.0 Manual.
Adjusting the Key Parameter for Multiple Sounds with different Key Values
► Click and drag the MULTI label next to Key to transpose the base key of all selected
Sounds. While dragging, the field displays a +/-x value indicating the transposition that
will apply to all Sounds as you release the mouse button.
Sound slots 1 to 4 are selected. If they have different Key values, a MULTI label appears (left). When you drag it (middle), a
transpose value appears (right) that will be applied to all selected Sounds when you will release the mouse button.
This is also true when adjusting the parameter from your controller.
Playing on the Controller
Adjusting the Key, Choke, and Link Parameters for Multiple Sounds
MASCHINE - Manual - 238
To Next Page
Loading...
