Native Instruments MASCHINE MK3 User Manual

A REX file loaded in the first Sound slot.
4.5.2 Importing MPC Programs to Groups
MASCHINE allows you to import Drum program files (.PGM and .AKP) from the Akai MPC ser-
ies to Groups. Supported models include the MPC4000, MPC3000, MPC2000, MPC500,
MPC1000 and the MPC2500.
Supported Parameters from MPC Programs
Since MASCHINE has a different approach to handling and naming parameters, please refer to
this list to find out how MPC Program settings are being translated into MASCHINE settings.
MPC Parameter MPC500,
1000, 2500
MPC400
0
MPC2000
(XL)
MPC300
0
MASCHINE Parameter
Sample Name x x x x Sample Name
Play Mode x x − − Playback Type (ADSR,
One-shot, AHD)
Sample Level x x − − Zone Level
Sample Pan − x − − Zone Pan
Range Lower/Higher x x − − High/Low Key
Tuning x x x x Tune
Attack x x x x Attack
Decay x x x x Decay
Managing Sounds, Groups, and Your Project
Importing Third-Party File Formats
MASCHINE - Manual - 222

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs