Native Instruments MASCHINE MK3 User Manual

→ The Pattern Editor in the software switches to Keyboard view.
See The Pad View in the Software for more details on the various pad modes available on your
controller.
10.1.6 Adjusting the Arrange Grid and the Pattern Length
The Arrange Grid defines regularly spaced-out timings notably used in following situations:
▪ Adjusting the Pattern length (see below).
▪ Adjusting the Section lengths.
Adjusting the Arrange Grid
To adjust the Arrange Grid:
► To adjust the Arrange Grid resolution, click the value beneath the Groups in the Arrange
view and select the desired setting from the menu (see above for the available settings).
→ The divisions of the Arrange Grid now have the size you have just selected.
The following Arrange Grid resolutions are available:
▪ 1 Bar, 1/2 note, …, 1/16th note: Each of these settings lets you adjust the Pattern Length by
the specified increment.
▪ Off: The Arrange Grid is disabled. Notably, you can freely set the Pattern Length to any val-
ue or set the playback position to any location.
Working with Patterns
Pattern Basics
MASCHINE - Manual - 439

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs