Native Instruments MASCHINE MK3 User Manual

Parameter Description
FREQ Section
Rate This is for adjusting the speed of the FM modulation.
Split The Split control determines the extent to which the FM effect
is applied to high frequencies via a crossover. Turn to the right
to affect higher frequencies. It can be useful to eliminate noise
artifacts caused by FM of very high signals.
With high Split settings, the effect becomes more “gritty” and
crackling.
DEPTH Section
Contour Contour determines the extent to which the input volume affects
the intensity of the effect.
Amount Determines the amount of the FM effect.
The FM on the controller.
14.3.4 Freq Shifter
The Freq Shifter shifts selected frequencies of the audio signal by a user-specified amount.
With high frequencies it sounds like a pitch shifter; with low frequencies it sounds like a spe-
cial chorus.
Effect Reference
Modulation Effects
MASCHINE - Manual - 690

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs