Native Instruments MASCHINE MK3 User Manual

The Freq Shifter panel in the Plug-in Strip.
The Freq Shifter in the Control area.
Parameter
Description
FREQ Section
Coarse This is used to define the basic frequency of the Freq Shifter.
Fine Fine-tune the frequency here.
OUTPUT Section
Feedback Adjusts the amount of output signal fed back into the input.
Increasing this parameter will increase the intensity of the
effect.
Stereo This parameter widens the stereo field of the effect.
Invert Inverts the settings of the Freq Shifter.
Mix Mix lets you adjust the amount of the effect in relation to the
dry original audio signal.
Effect Reference
Modulation Effects
MASCHINE - Manual - 691

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs