Native Instruments MASCHINE MK3 User Manual

▪ You can also drag a Sample onto the focused Sound slot or directly to the Slice page from
the Browser or from your operating system. It will then appear on the page and replace any
Sample already loaded in that Sound.
16.4.1 Opening the Slice Page
In the software, slicing a Sample is done in the Slice page of the Sample Editor.
► In the Sample Editor, click the Slice tab at the top to open the Slice page.
The Slice page looks as follows:
The Slice page in the software.
Opening the SLICE Page on Your Controller
► In Sampling mode, press Button 3 to access the SLICE page.
The SLICE page looks as follows:
Sampling and Sample Mapping
Slicing a Sample
MASCHINE - Manual - 838

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs