Action Procedure
Insert another effect after the
selected effect
Press SHIFT + Button 3.
The Browser automatically opens and lets you select the
desired effect preset to be inserted after the Plug-in currently
selected.
Replace the effect Use the Plug-in Browser (press SHIFT + BROWSE) or the
Browser (BROWSE) as described in section ↑13.1.1, Adding
an Effect above.
Remove the effect Press SHIFT + Button 8.
The effect is removed from the Plug-in slot and all following
effects are shifted one slot up to fill the gap.
Move the effect Press SHIFT + Button 5/6 to move the effect to the previous/
next slot, respectively.
Bypass the effect Press SHIFT + Button 7.
Recall an effect preset Use the Browser (press BROWSE) to access and load any
effect preset. See section ↑3.2, Searching and Loading Files
from the Library for more on this.
Native Instruments and External
Effects
Open/close the effect window Press SHIFT + Button 2 (EDIT).
You will find more details on Plug-in operation in section ↑6.1, Plug-in Overview. You will find
more details on the specific operations available for Native Instruments and External Effects in
section ↑6.2.6, Page 6: Velocity / Modwheel.
13.1.3 Using the Side-Chain Input
For certain Plug-ins, MASCHINE allows you to use a side-chain input to control how the effects
process the audio.
Using Effects
Applying Effects to a Sound, a Group or the Master
MASCHINE - Manual - 638
To Next Page
Loading...
Need help?
General
