Action Procedure
Bypass an effect Click the FX icon (in Arrange view) or the little square (in Mix
view) at the left of the effect name in the Plug-in List. Click
again to re-enable the effect.
Save the current effect
settings as preset
Open the Plug-in menu, and select Save As… at the bottom
of the menu.
Recall an effect preset Use the Browser (see chapter ↑3, Browser), or open the Plug-
in menu and select Open… at the bottom of the menu.
Native Instruments and External
Effects
Open/close the effect window Arrange view: Click the little window icon in the top left
corner of the Parameter area (at the left of the first page tab).
Mix view: In the Plug-in Strip under the Mixer, click the little
arrow in the top left corner of the effect panel.
Save the current settings as
default preset for this effect
Open the Plug-in menu, and select Save As Default… at the
bottom of the menu.
For detailed information on these topics, please refer to ↑6.1, Plug-in Overview. You will find
more details on the specific operations available for Native Instruments and External Effects in
section ↑6.2.6, Page 6: Velocity / Modwheel.
Other Effect Operations on the Controller
Once you have selected an Effect Plug-in in a Sound, in a Group or in the Master, following
actions are available:
Using Effects
Applying Effects to a Sound, a Group or the Master
MASCHINE - Manual - 637
To Next Page
Loading...
Need help?
General
