Native Instruments MASCHINE MK3 User Manual

Volume and Velocity Shortcuts
The VOLUME button.
In Pad Mode, Keyboard mode or Chords mode:
1. Press the VOLUME [Velocity] button.
2. To change the output level of the Master (i.e. the overall output level of MASCHINE), sim-
ply turn the 4-D encoder.
3. To change the output level of a Group, hold its Group button (first navigate to its Group
bank if necessary) and turn the 4-D encoder.
4. To change the output level of an individual Sound, hold its pad and turn the 4-D encoder.
In Step mode:
► To change the velocity of a selected step in Step mode, hold its pad and turn the 4-D en-
coder.
→ The adjusted value is temporarily shown on the left display.
To adjust the value in finer increments, press and turn the 4-D encoder (or hold SHIFT
while you turn it).
These shortcuts control the LEVEL parameter in the AUDIO page of the Master’s,
Group’s, and Sound’s Output properties, respectively. See section ↑11.1.2, Configuring
the Main Output of Sounds and Groups and ↑11.1.4, Configuring the Master and Cue
Outputs of MASCHINE for a detailed description of these properties.
Playing on the Controller
Playing Tools
MASCHINE - Manual - 249

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs