Native Instruments MASCHINE MK3 User Manual

Parameter Description
FREQ Section
Cutoff Controls the cutoff frequency of the filter.
Resonance Controls the amount of resonance, i.e. the amount of amplification
near the cutoff frequency. It is not available with filter mode Notch.
MOD Section
Amount This defines how much the Filter gets modulated by the modulation
source.
Source Here you can select between three different modulation sources:
LFO, LFO Sync, and Envelope. Depending on your choice for the
modulation source, the following parameters appear to the right:
Source: LFO
Speed Defines the speed of the modulation in hertz ranging from 0.03 Hz
up to 16 Hz.
LFO Shape Defines how the LFO evolves over time.
Source: LFO Sync
Speed Defines the speed of the modulation in note values from 16/1 (one
cycle every 16 bars) up to 1/32 note.
LFO Shape Defines how the LFO evolves over time.
Phase Adjusts the start phase of the LFO.
Source: Envelope
Decay With Decay you adjust how fast the envelope fades out.
Smooth Smooths the shape of the envelope.
Shape Change the shape of the envelope here.
Effect Reference
Filtering Effects
MASCHINE - Manual - 681

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs