Setting Description
Usage Data Tracking
Allow usage data tracking Here you can select to enable or disable Usage Data Tracking.
Usage Data Tracking technology enables MASCHINE to
automatically track anonymous usage data that you can choose
to share with us.
All users should keep Data Tracking enabled as it provides a
valuable tool for understanding the performance of Native
Instruments applications when they are used in real life
situations. The data sent to Native Instruments is one hundred
percent anonymous and will not affect performance.
For more detailed information about Usage Data Tracking,
please refer to the following Knowledge Base article on the
Native Instruments website:
https://support.native-instruments.com/hc/en-us/articles/
209545029
Adjusting General Preferences Using the Controller MK3
You can access the General preferences directly from the controller. The options found here
are a replica of those found in the software.
To access the General preferences from your controller:
1. Press SETTINGS to display the Settings page.
2. Press Button 1 (GENERAL) to access the General settings.
▪ Turn Knob 1 (LEVEL) to adjust the volume level of the Metronome.
▪ Turn Knob 2 (TIME) to adjust the time interval between each tick of the Metronome.
▪ Turn Knob 3 (AUTO-ON) to automatically enable the metronome when you start recording a
Pattern.
▪ Turn Knob 4 (LENGTH) to adjust the duration of the Metronome count-in.
▪ Turn Knob 5 (MODE) to adjust the quantization mode.
Basic Concepts
Preferences
MASCHINE - Manual - 70
To Next Page
Loading...
Need help?
General
