Native Instruments MASCHINE MK3 User Manual

If Vendor is selected in the Category / Vendor selector, the Product list is sorted by the names
of the manufacturers.
► To select a product and show only the preset files associated with it, click on the product
in the list.
→ Upon your selection, the Product selector automatically closes, the product name and
icon appear in the header, and the tag filter and results list below will be filtered accord-
ingly.
Products are shown in the Product selector only if the Library contains files for them. If
a particular product does not show up, make sure that you have installed the latest up-
dates using Service Center.
Resetting the Product Selection
► To reset the selection made in the Product selector, click the little cross at the right of
the product name:
→ The product selection is cancelled. The Product selector displays the generic label All In-
struments. The tag filter and the results list under the Product selector now include files
for all products.
Selecting a Bank
When you select specific products in the Product list (see description above), an additional
Bank menu appears under the closed Product selector:
Browser
Searching and Loading Files from the Library
MASCHINE - Manual - 117

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs