1. Press PLUG-IN to enter Control mode and access your Plug-ins.
2. Navigate to the channel (Master, Group or Sound) hosting the Plug-in for which you want
to recall the search query — see section ↑2.3.7, Focusing on a Group or a Sound and
↑2.3.8, Switching Between the Master, Group, and Sound Level.
3. In this channel, select the desired Plug-in (for a Sample, select the Sampler Plug-in in
which it is loaded) — see section ↑2.3.9, Navigating Channel Properties, Plug-ins, and
Parameter Pages in the Control Area.
4. Press Button 8.
⇨ Button 8 is illuminated, and the result list that was used to find this file directly appears
in the right part of the right display:
5. Turn the 4-D encoder to select the desired Plug-in preset or Sample from the list, and
press the 4-D encoder to load it.
→ The selected file replaces the previous file in your Project.
Browser
Using Quick Browse
MASCHINE - Manual - 174
To Next Page
Loading...
