Native Instruments MASCHINE MK3 User Manual

The Pad view.
The Pad view can be shown by activating the Pad View button above the Sound List:
The Pad View button.
► Click the Pad View button to show or hide the Pad view.
→ The Pad view replaces the Sound List on the left of the Pattern Editor.
In the Pad view, each cell represents a pad on your controller and corresponds to a Sound slot
in the current Group. You can select Sound slots in either the Sound List or the Pad view as
you see fit, both selections are strictly equivalent.
In addition to the Sound management features described in the following sections, the
Pad view provides extra settings affecting the behavior of your pads. See section ↑5.1,
Adjusting the Pads for more information.
Managing Sounds, Groups, and Your Project
Managing Sounds
MASCHINE - Manual - 185

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs