Native Instruments MASCHINE MK3 User Manual

2. While holding the mouse button, drag your mouse toward the desired location in the
Sound List or in the Pad view.
As the mouse cursor moves an insertion line appears at the potential places where you
can drop the Sound slot(s).
3. When the insertion line appears at the desired location in the Sound List or in the Pad
view, release the mouse button.
→ Each Sound takes its new place in the Group. On your controller, the Sounds will be trig-
gered by the pads whose numbers appear left of the Sound slots in the Sound List or on
the cells in the Pad view.
You can also drag Sounds to another Group in the Group List of the Arranger: The Sounds will
be inserted in the first empty Sound slots of that Group, and that Group will automatically get
the focus. However, in that case the Pattern content of the Sounds won’t be moved.
Sounds cannot be moved within the Sound List when Pre-listen (speaker button) is
switched on.
If you drag the Sound(s) to the “+” at the end of the Group List, a new Group is auto-
matically created and your Sound(s) will be moved to the first Sound slot(s) of that
Group.
Managing Sounds, Groups, and Your Project
Managing Sounds
MASCHINE - Manual - 196

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs