Native Instruments MASCHINE MK3 User Manual

3. Right-click (macOS: [Ctrl]-click) any Group in the Group List and select Paste from the
context menu to replace that Group with the copied one. If you want to paste the Group
without affecting the existing Groups, first click the “+” under the last Group to create a
new empty Group and paste the Group there.
→ All parameters of the Group will be copied. The Group previously in that position in the
Group List will be replaced.
Cutting, Copying, and Pasting Logic for Multiple Groups
The cutting procedure for multiple Sounds and Groups is as follows:
▪ When you cut a selection of Groups, they are placed into the clipboard and removed from
the Group List. All following Groups in the list are shifted up to fill the gap.
The copying procedure for multiple Groups is as follows:
When you copy a selection of Groups, they are both placed into the clipboard and kept in the
Group List.
The pasting procedure for multiple Groups is as follows:
Managing Sounds, Groups, and Your Project
Managing Groups
MASCHINE - Manual - 207

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs