Native Instruments MASCHINE MK3 User Manual

2. Navigate to the MPC Program file you want to import and double-click it.
You will be prompted with the MPC Import panel:
3. In the Input section of the panel, select one of the import options (see table below).
4. Click OK to start the import procedure (or Cancel to close the panel without importing
anything).
Managing Sounds, Groups, and Your Project
Importing Third-Party File Formats
MASCHINE - Manual - 224

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs