Native Instruments MASCHINE MK3 User Manual

The Control Signal Flow—Pads in Group Mode
The following diagram illustrates signal flow between your hits on the pads in Group mode and
the resulting sounds:
The signal flow including the Perform features (Note Repeat, Choke Group, and Link Group) when your pads are in Group
mode.
In this picture you will notice the following:
▪ Note Repeat takes the place of the Scale, Chord, and Arp modules between the live input
on the pads and the Pattern Editor. In other terms, Note Repeat won’t process your Pat-
terns but you can record its output into a Pattern.
▪ The Choke Group and Link Group modules affect both your hits on the pads and the con-
tent of your Patterns, but their result cannot be recorded into Patterns.
Playing on the Controller
Performance Features
MASCHINE - Manual - 255

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs