2. Click MIDI Change.
3.
▪ This opens the following dialog:
▪ Click Lock Enabled from the dialog.
4. In the submenu that opens, select the source you want to use for changing the MIDI Pro-
gram Change messages. A list of connected controller names appear in the drop-down
menu, or you can select None to disable the feature.
5. Then select MIDI Note to trigger your Lock snapshots via MIDI notes, or Program Change
to trigger your Lock snapshots via MIDI Program Change messages.
6. If necessary, reopen the same submenu and select the MIDI channel the Lock changes
should receive MIDI messages from (channel 1 by default).
Playing on the Controller
Using Lock Snapshots
MASCHINE - Manual - 273
To Next Page
Loading...
