4. In the Plug-in List, click the icon left to the Plug-in name (keys for an Instrument Plug-in,
FX for an Effect Plug-in) to bypass this Plug-in.
The Plug-in does not affect the sound anymore. The icon is grayed out to indicate that
this slot is now bypassed.
Use the same method to unmute the Plug-in:
► To activate the bypassed slot again, click its grayed out icon.
In most cases the first Plug-in slot contains an Instrument Plug-in (e.g., a Sampler). Be
careful: bypassing the slot will mute the whole Sound!
Bypassing a Plug-in Slot on the Controller
1. Press the PLUG-IN button to enter Control mode and display Plug-in slots.
2. If you want to bypass a Plug-in of the Master, press Button 1 to select the MASTER tab.
3. If you want to bypass a Plug-in of a Group, press Button 2 to select the GROUP tab and
press the Group button A–H corresponding to the desired Group. If necessary, first press
SHIFT + the desired Group button A–H to switch to the Group bank containing that
Group.
4. If you want to bypass a Plug-in of a Sound, press Button 3 to select the SOUND tab, se-
lect its parent Group as described in the previous step, and press SELECT + the pad of
that Sound (or simply hit its pad if pads are in Group mode).
5. Press Button 5/6 to select the desired Plug-in slot.
The name of the selected Plug-in appears in the field between the left and right arrows
under Button 5 and 6. If there are no Plug-ins in the channel this will read EMPTY.
Working with Plug-ins
Plug-in Overview
MASCHINE - Manual - 292
To Next Page
Loading...
